4 Tips To Reduce Moisture In The Crawlspace Of Your Home Downers Grove IL
When you think of a crawlspace, you probably think of it as a small space that connects your home to the ground. You also may believe that there’s always moisture in this area or that it can become moldy if not cleaned regularly. However, there are ways that you can use to reduce moisture in your crawlspace and make sure it stays dry:
1. Place a Vapor Barrier On The Ground
One of the most important things you can do in crawlspace waterproofing is to place a vapor barrier on the ground. This will absorb moisture from below, keeping it dry and cool. It also protects against mold and mildew growth, which can be toxic if they’re not properly controlled.
If you’re using plastic boards in lieu of tarps, use them only as a temporary solution until you’ve finished installing your vapor barrier!
2. Provide Adequate Ventilation for The Crawlspace
Ventilation is important to prevent moisture and mold in your crawlspace. You can install a fan in the crawlspace, or you can install windows or doors that provide ventilation.
If you have a basement with an unfinished ceiling and no access to fresh air, then it’s important to have these windows open during the summer months so that this space doesn’t get too hot or humid.
Install A Sump Pump In The Crawlspace You can install a sump pump in the crawl space of your home. A sump pump is a mechanical device that removes excess water from a building. It’s installed in the crawl space, connected to a drainage system, and should be installed in a watertight pit.
3. Seal All Cracks and Holes In The Foundation
When it comes to sealing cracks and holes in the foundation as a way of crawlspace waterproofing, there are two types of sealants: flexible and rigid. Flexible sealants can be used on any surface that’s not concrete or masonry. These include wood decks, fences, and decks; concrete slabs; and even fiberglass insulation.
Rigid sealants are designed specifically for use on surfaces like concrete slabs as well as brick walls.
In conclusion, it is important to understand that moisture in the crawlspace of your home can cause problems. The most common causes of moisture in crawlspaces are poorly sealed cracks and holes in foundation walls or insufficient ventilation. In some cases, these problems may be caused by other factors such as poor drainage or inadequate insulation levels. If moisture is not properly managed, mold growth may result, which can lead to structural damage as well as a host of health issues!
Talk to a crawlspace waterproofing expert today!
Contact the Professionals at Everdry Waterproofing Illinois Today! (630) 769-9300